Technical information

Wood House Maintenance

Wood is a beautiful, stylish, and eco-friendly building material. Wooden houses provide a comfortable indoor climate and remain attractive for a long time if maintained regularly.

As a natural material, wood reacts to environmental changes such as humidity, wind, and large temperature fluctuations. Untreated wood will quickly turn gray and may develop mold. To preserve your wooden house for as long as possible and maintain our warranty, maintenance instructions must be carefully followed.

Finishing

Wood protection products not only enhance the aesthetic appearance of the wooden house but also provide important protection against UV rays, moisture, and pests. Before applying any finish, ensure that all wood surfaces are clean and dry. Choose a high-quality wood protection product that matches your desired appearance and offers sufficient durability. Follow the manufacturer’s instructions for application technique.

After installation, all wooden components (interior walls, exterior walls, floorboards, ceiling boards, door frames, window frames, etc.) should be immediately treated with a wood protection product. We also recommend treating the undersides of floorboards. Initially, 2-3 coats should be applied. After the initial treatment, repeat the process regularly according to product maintenance instructions, typically every five years. Failure to follow maintenance instructions voids the warranty. Exterior treatment should only be done in dry weather, as the product should not be applied to wet surfaces. Direct sunlight and extreme heat may cause uneven drying and color.

Storm Protection

Our products come with metal rods (referred to as storm protection rods). Factory-drilled holes are provided in the ends of the beams for rod installation, which are inserted after wall assembly. Secure the rods with washers and nuts, then adjust manually according to wood expansion or settlement. During the first year, adjust the storm protection every two months, then every four months thereafter. Always turn the nuts by hand.

Wood acts as an indoor climate regulator, absorbing excess humidity and releasing it when the air is dry. Many customers prefer to leave log walls untreated for this reason. If you want to insulate your wooden house, use insulation materials with similar properties to wood.

If an unheated wooden structure is left unused, gaps may develop between floorboards that could require later adjustment.

Our Product Doors and Windows

Most of our products come with doors and windows equipped with standard rubber seals. However, some windows and doors, like the “Standard” system, do not include rubber seals by default. This may allow water to pass through in extreme weather conditions (e.g., heavy rain) but does not indicate poor quality.

For doors and windows without seals, we recommend adding silicone or rubber seals behind the trim as part of regular customer maintenance. Products equipped with all necessary seals require no additional measures.

Doors and Windows Settlement Gap

Wood-framed doors and windows may exhibit minor operational issues due to natural movement. To ensure proper function, allow the wood product to adjust naturally. Sufficient gaps should be left above windows and doors to accommodate settlement.

It is important to allow the house to settle during the first two years after installation. Flexible foams or silicone may be used to fill gaps afterward; always choose products that remain pliable and do not harden excessively.